PDF Pattern download

When you download one of our PDF patterns, it will come with all sizes offered in one file. To make things easier, you can choose only the size you want to print.

Use the layer icon to choose the size you want to print.

The boxes in the layers have eyeballs that indicate what sizes are showing.

Click on the eyeball boxes to remove the sizes not needed. 

IMPORTANT: Make sure the eyeball is showing on the "Info Layer" for any size or sizes you choose to print. (this layer has all the important information and registration markings.)


Make sure your printer is set to print at 100%. This is very important so that your pattern is accurate. There are guides at the top of the page you can measure if you are unsure.

Once you have all your pages printed, cut along outer edge of dotted line on bottom of page and right hand side of the page only.

Match up pages, “cut edge” on top of "uncut edge" in order of page row A1, A2, A3 etc. try to keep everything even and while matching all intersecting lines and guides. Tape or glue as you match up each page in the row.

Then start the next rows B1, B2, B3 .… then C1, C2, C3 and so on until all the pieces are joined.

Now you are ready to cut out your pattern. If you printed out one size, just cut around the outside edge of the pattern pieces. If you printed all sizes, choose the size you want to use and cut along that size line.